Skypatrol protocol requires mask to decode data. If your device doesn't send it, it's possible to specify it in Setup->Tracking ports->Skypatrol->Edit. On the left side type in „mask“ and on the right side – key.
Mask should be decimal number.
>RSP=T;ID=<deviceId>;AT+CGDCONT=1,”IP”,”<apn>”<
>RSP=T;ID=<deviceId>;AT%CGPCO=1,”<apnUser>,<apnPass>”,0<
>RSP=T;ID=<deviceId>;AT$AREG=2<
>RSP=T;ID=<deviceId>;AT$FRIEND=1,1,”<109.235.68.205>”<
>RSP=T;ID=<deviceId>;AT$UDPAPI=,6021<
>RSP=T;ID=<deviceId>;AT$WAKEUP=1,1<
>RSP=T;ID=<deviceId>;AT$APIOPT=1,1<
>RSP=T;ID=<deviceId>;AT&W<
>RSP=T;ID=<deviceId>;AT$RESET<
NOTE: if above does not work, please switch connection to TCP and port to 6008.
Content | Specification |
---|---|
Dimensions | 80mm x 50mm x 26mm |
Weight | 89g |
Network | GSM/GPRS |
Band | 850/900/1800/1900 MHz |
GPS chip | Sirf III |
GPS sensitivity | -159dBm |
Battery | 3.7V 250mAh Li-ion battery |
Smart Transportation Conference & Exhibition 2025
Date:May 30, 2025
Location:Virtual
TelematicsCEEurope
Date:September 15, 2022
Location:Ljubljana, Slovenia
AWS Summit Berlin
Date:February 26-27, 2019
Location:Berlin, Germany
CES in Las Vegas
Date:January 08-11, 2019
Location:Las Vegas, USA
CEBIT 2018
Date:June 11 – 15, 2018
Location:Hannover